Table of Contents
Advertisement
CLEANING & MAINTENANCE
Daily Cleaning:
1.
Open the shaver head by pressing the release button on the front of
the shaver (Fig. H) and flipping open the head away from the body of
the shaver (Fig. I).
2.
Tap out excess hair shavings.
3.
Rinse the head of the shaver in running water.
4.
Close the head assembly.
Monthly Cleaning:
•
Perform cleaning steps 1 and 2.
•
Hold the shaver upside down so that the open cutter assembly is
facing towards you. Slide the blue cutter support frame upwards
towards the shaver to release it from the assembly (Fig. J).
•
Pull the cutter support frame away from the inner cutters (Fig. K).
•
Thoroughly brush hairs from the inner and outer cutters. Rinse out
remaining debris (Fig. L).
•
Place the cutter support frame back into position and lock into place
(Fig. M-N).
•
Align the spring hinge into the slot at the back.
Warning:
•
Detach the power adaptor from the shaver before cleaning in water.
•
Shaver heads are suitable for cleaning under a water tap.
Caution:
•
Shaver heads can be rinsed with water. The water temperature should
not exceed 70 degrees. Unplug the shaver before cleaning with water.
•
Keep the adaptor and cable dry.
H
L
I
M
J
N
K
H
Advertisement
Table of Contents
