GE GTE21GTHFWW Owner's Manual & Installation Instructions page 21

REVERSING THE DOOR SWING (Cont.)
REHANG THE
5
REFRIGERATOR DOOR
1. Lower the refrigerator door onto the bottom
hinge pin.
2. While holding the door securely, align the
socket in the door with the hole in the center
hinge. Attach the center hinge and gasket
ratchet.
3. Check to ensure the alignment between the
socket in the door and the hole in the center
hinge and tighten with a Phillips screwdriver
until the shoulder of the hinge pin is touching
the center hinge.
49-1000636-1
Installation Instructions
REHANG THE FREEZER
8
DOOR
pin.
2. Place the left top hinge so the pin fits into
the door socket. (Left top hinge and cover
can be found inside of the product. Call GE
Appliances Service at 800.GE.CARES
(800.432.2737 or in Canada call
800.561.3344 if parts are missing.) Support
the door on the handle side and make sure
the door is straight and the gap between the
doors is even across the front. While holding
the door in place, tighten the top hinge
Tighten them until they are just snug, and
then turn them another one-half turn.
3. Snap the left top hinge cover over the hinge.
21