How to use
ATTENTION: Use after drying
completely
If suction power is decreased after cleaning dust tank, clean air filter and
motor safety filter. Air filter and motor safety filter are located at the center
of vacuum cleaner in the above figure.
• Open the air filter cover by pulling the air filter cover lever and take
out air filter.
• Separate the parts
• Wash air filter and motor safety filter with water.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
• Air filter and motor safety filter should be cleaned in the above case.
Cleaning air filter and motor safety filter
Air filter
WARNING
Dry fully for more than 24 hours in shade.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service
Agent.
Motor safety filter
13