Connecting To An Amplifier With Dolby Digital Decoder, Dts Decoder Or Mpeg2 Decoder (Example 4); Connecting To A Digital Amplifier (Example 5) - Sanyo DWM-400 Instruction Manual

Notes:
• For VIDEO connection, please refer to "BASIC CONNECTIONS".
• Please refer to the instruction manual of your amplifier.
• When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the
wall outlet until all the connections have been made.
Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder
(Example 4)
To digital audio input
*Coaxial audio cable
(not supplied)
To COAXIAL DIGITAL
OUT jack
To enjoy Dolby Digital sound
Select "DOLBY DIGITAL BITSTREAM" in "Setting Digital Out"
on the INITIAL SETTINGS. (See page E33.)
To enjoy DTS sound
Select "DTS ON" in "Setting Digital Out" on the INITIAL
SETTINGS. (See page E33.)
To enjoy MPEG2 sound
Select "MPEG BITSTREAM" in "Setting Digital Out" on the
INITIAL SETTINGS. (See page E33.)

Connecting to a Digital Amplifier (Example 5)

You can enjoy 2 Channel Digital Stereo Sound.
*Coaxial audio cable
(not supplied)
To COAXIAL DIGITAL OUT jack
To enjoy 2 Channel Digital Stereo sound
Select "DOLBY DIGITAL LPCM", "MPEG LPCM", and "DTS
OFF" in "Setting Digital Out" on the INITIAL SETTINGS. (See
page E33.)
Note:
If "DTS ON" is selected, loud noise will occur. (See page E33.)
DWM-400/US (new)English 13
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder
Center
speaker
Front left
Front right
speaker
speaker
Surround left
speaker
*Please consult your local audio/video dealer.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital The-
ater Systems, Inc.
Amplifier with a coaxial digital input
To digital audio input
Front left
speaker
*Please consult your local audio/video dealer.
-E12-
4/26/04, 11:49 AM
Subwoofer
Surround
right speaker
Front right
speaker