Reset Button Behavior; Management Port - Samsung ES1642dc Hardware User Manual

Qnap enterprise-class
Table of Contents

Advertisement

protect your data. RAID-TP requires a minimum of 4 drives.

Reset Button Behavior

Reset button: Press to reset the system settings.
System
All ES models
Basic system reset (3 sec)
Press the reset button for 3 seconds, a beep sound will be heard. The System administration
password will be reset to default.
Advanced system reset (10 sec)
Press the reset button for 10 seconds; you will hear two beeps at the third and the tenth seconds. The
settings such as the users and user groups previously created will be cleared. The ES NAS will reset all
the system settings to default as it would by using the web-based system reset in "Control Panel" >
"System Settings" > "Backup / Restore" > "Restore to Factory Default" > "Reinitialize NAS". However,
resetting the ES NAS by holding the button, the data on the ES NAS will not be deleted.

Management port

The management is provided by Intel® 82579 Gigabit Ethernet controller. The management port allows
you to connect to the QES desktop of the ES NAS. The default ES NAS management website is
169.254.100.100:8080. If the ES NAS has been configured to use DHCP, you can use the QNAP Qfinder
Pro to check the IP address of the ES NAS. Make sure the ES NAS and the computer that runs the QNAP
Qfinder Pro are connected to the same subnet. The system requires that the management IP addresses
are configured on both controllers and that the controllers' management ports are connected to the
management network. This should be a separate LAN or a VLAN because you should not use the
production LAN or VLAN for management network traffic. To configure the management port IP Address,
please refer to the software user manual. In case that one Storage Controller fails, you can enable
takeover function from the High Availability app in QES to manage the system through the management
port of the other Storage Controller with the same IP address. For more information, please see the
software user manual.
Basic system reset
(1 beep)
3 sec
Advanced system reset
(2 beeps)
10 sec
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nas seriesEs1640dc

Table of Contents