Panasonic ES-EL2A Operating Instructions Manual page 5

WARNING
This product
This product has a built‑in rechargeable battery. Do
not throw into flame or heat. Do not charge, use, or
leave in high temperatures.
- Doing so may cause overheating, ignition, or explosion.
Do not modify or repair.
- Doing so may cause fire, electric shock, or injury.
Contact an authorized service centre for repair (battery
change etc.).
Never disassemble except when disposing of the
product.
- Doing so may cause fire, electric shock, or injury.
In case of an abnormality or malfunction
Immediately stop using and remove the adaptor if
there is an abnormality or malfunction.
- Failure to do so may cause fire, electric shock, or injury.
<Abnormality or malfunction cases>
• The main unit, adaptor or cord is deformed or
abnormally hot.
• The main unit, adaptor or cord smells of burning.
• There is abnormal sound during use or charging of
the main unit, adaptor or cord.
- Immediately request inspection or repair at an
authorized service centre.
Preventing accidents
Do not place within reach of children or infants. Do
not let them use it.
- Doing so may cause an accident or injury due to
accidental ingestion of the inner blade, brush, etc.
PB015629 - ES-EL _10-12-17.indd 5
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
- Failure to do so may cause an accident or injury.
The supply cord cannot be replaced. If the cord is
damaged, the AC adaptor should be scrapped.
- Failure to do so may cause an accident or injury.
Cleaning
Always unplug the adaptor from a household outlet
when cleaning.
- Failure to do so may cause electric shock or injury.
Regularly clean the power plug and the appliance
plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure
caused by humidity.
Disconnect the adaptor and wipe with a dry cloth.
5
2017/10/12 15:12:23