Recording Fm Broadcasting - Sanyo DMP-M1200 Instruction Manual

To listen to the FM broadcasting with the speaker
Select "Menu setting" mode. Select FM v SPEAKER/H.P v SPEAKER (See page 32),
then press the Jog M button.
• However, the headphones should be connected continuously since it plays a role of
an antenna.
• If you switch to the player mode or turn the unit off, the headphones will be selected
automatically.
To listen to the FM broadcasting with mono sound
Noise can be occurred if you listen to the broadcasting in weak frequency area. In this
case, select mono sound to reduce noise.
Select "Menu setting" mode. Select FM v ST/MONO v MONO (See page 32), then
press the Jog M button.

Recording FM broadcasting

Press the m (REC/PAUSE) button while you're listening to the broadcasting.
FM mode
• If the headphones are not connecting, "Please connect HEADPHONE!" appears.
Connect the headphones.
• If a noise is recorded during recording FM broadcasting, select another recording
quality (See page 23).
FM recording mode
[ENGLISH] 28