Capturing Still Images - Sanyo Xacti VPC-S5 Instruction Manual

Set the camera to the video clip shooting mode
1
Set the main switch to [
h An image appears on the LCD monitor. If no image appears, please
see page 83 and follow the steps to enable the LCD monitor.

Capturing still images

1
Set the camera to the still image
shooting mode (see page 29).
2
Slowly press and hold the shutter
release button halfway.
h The target mark
icon (focus-lock) appears in
the LCD monitor.
h If the Shooting Setting Screen
(see page 40), was displayed, it is
exited.
3
Press the shutter release button
all the way.
h The image is captured.
], and turn on the camera.
or the focus
Focus icon
Shutter release button
LCD monitor
(Press halfway)
Target mark
(Press fully)
English
30