Viewing Still Images - Sanyo VPC-X1400 Instruction Manual

Viewing still images

The steps for viewing both single shots and sequential shots are the same.
1
Press the playback button
[=].
h If the playback button [=]
was pressed to turn the
camera on, however, press the
playback button [=] for at
least 1 second.
h The image most recently
captured appears on the
monitor.
2
View other images.
h Toggle the SET button to the
left or right to display the
previous or next image.
To display the previous image:
Toggle the SET button to
the left.
To display the next image:
Toggle the SET button to
the right.
h To return to the Shooting
Screen, press the playback
button [=].
<If the camera was turned on by
pressing the playback button
[=]>
h When the playback button [=] or ON/OFF button is pressed, the
camera turns off.
When you are finished viewing images...
i Press the ON/OFF button to turn the camera off.
HINT
For still images with voice memo (pages 42 and 43)...
i When the shutter button is pressed, the voice memo is played back.
Playback button [=]
2010.12.24 2010.12.24 2010.12.24
100-0001 100-0001 100-0001
30
English