Sharp AR-FR11 Operation Manual page 8

ENGLISH
CLEAR ALL MEMORY
This program is used to manually clear all data from the memory and hard disk of the
machine.
Note, however, that the following types of data are not cleared with this program. Use the
"CLEAR ADDRESS BOOK DATA/IMAGE SEND REGISTERED DATA" program on page 7
to clear the following types of data
INDIVIDUAL/GROUP/PROGRAM/RELAY BROADCAST MEMORY BOX*
●
SENDER CONTROL LIST
●
POLLING MEMORY/CONFIDENTIAL MEMORY BOX*
●
SENDER DATA
●
ALLOW/REJECT RECEPTION SETTING DATA (INCLUDING POLLING PASSCODE
●
NUMBER)
* The image data stored in the MEMORY BOX is cleared to execute this program (CLEAR
ALL MEMORY).
NOTE
We recommend that you execute this program before turning off the power.
Touch the [CLEAR ALL MEMORY] key. The following screen appears asking you to confirm
your selection ("YES" or "NO").
[Clear screen 1]
CLEAR ALL MEMORY.
(EXCLUSIVE OF ADDRESS BOOK/
SENDER LIST DATA.)
[Clear screen 2]
CLEARING ALL MEMORY. AUTO REBOOT IS
IMPLEMENTED AFTER CLEARING.
(50.0%) (1/1 time)
0% 50%
If you wish to cancel after data clearing has begun
Touch the [CANCEL] key. The key operator code entry screen will appear. Enter the key
operator code with the numeric keys. Data clearing will stop as soon as the correct key
operator code is entered. Note that any data cleared prior to entry of the key operator
code will not be restored (this data is lost).
NO YES
CANCEL
100%
To return to the "SECURITY SETTINGS"
●
menu screen, touch the [NO] key.
To clear all memory, press the [YES] key.
●
"PLEASE WAIT." appears, and then the
following screen is displayed.
While data clearing
●
percentage of data cleared and the number of
repetitions is displayed.
When the data has been cleared, the power
●
briefly turns off and then automatically turns
on again.
6
takes place, the