Table of Contents
Advertisement
Top Page > Configuring Various Settings > Analogue Channel Settings >
Presetting analogue programmes manually
Steps
1.
Press the HOME button, then select
2.
Select
[Analogue Set-up] → [Manual Programme Preset] → the desired option.
Available Options
[Programme]
Selects a programme number to tune manually.
[TV System]
Selects a TV broadcast system.
[Channel]
Enables selection of [S]/[Z]* for cable channels or [C]/[DS]* for terrestrial channels.
* Option name differs depending on your region/country.
[AFT]
Allows you to fine-tune analogue channels to adjust picture quality.
[Audio Filter]
Improves the sound of the selected channel in mono broadcasts.
[Skip]
Skips unused analogue channels.
[LNA]
Improves the picture quality of the selected channel when the broadcast signal is weak.
([LNA] may not be available depending on the situation.)
[Colour System]
Sets the colour system according to the channel.
[Signal Level]
Displays the signal level for current programme.
Notes
You cannot select a programme number that is set to [Skip].
Available options may vary depending on your region/country.
© 2014 Sony Corporation
Presetting analogue programmes
[Settings].
manually
List of Contents
Advertisement
Table of Contents
