Advertisement
Preout switching
Procedure
Press and hold [AUD] key when the source is Standby source
[ATT] key operation
Procedure
In the TUNER source, press [DISP] key
MENU-related test mode
Procedure
Press the [Menu] key (main unit)
Press the [DNPP/SBF] and [DIRECT] keys (Remote controller)
Backup current measurement
Procedure
While ACC OFF (Back Up ON), Reset
Fluorescent indicator (ED1) short check
Procedure
In the STANDBY source, press [AM]
key
E2PROM data all clear
Status
While pressing and holding [2] key and
[5] key, reset-start.
Clear service data and installer memory saved in E2PROM.
While "– – – –" is displayed, power can be ON for 30 minutes. This mode is cancelled by resetting. (The last screen will not be retained.)
Data to be cleared is shown below.
CD mechanism information
Service Information
DC offset error information
Installer memory
Backup memory
TEST MODE
All lights are off → Turns on odd and even terminals alternatively every 125ms (terminals that have a
maximum number of grids) → Turns on only the odd terminals → Turn on only the even terminals →
Display
C
L
R
O
C
L
R
X
CD mechanism error log display
Displays CD loading error data
Displays CD EJECT error data
Displays CD time code count error data (missing count)
Displays CD time code count error data (count not updated)
Power ON time display
CD operation time display
CD EJECT times display
PANEL open/close times display
Forced Power OFF information display
DC offset error 1 display (Provides information on whether there is an improper connection or another error)
DC offset error 2 display (Provides information on the number of capacitor leaks)
Installer memory (DSP setting value) 1~3
Volume offset value
Tuner preset data
PAL-NTSC condition
KDV-415U/5244U/5544U
/MP5042U/MP5343U/MP5443U
Preout switching (1Preout / 2Preout model)
ATT OFF/ON
Continuous forwarding by remote control is prohibited
MUTE terminal is OFF after 2 seconds, not after 15 seconds.
(During this time, the CD mechanism does not function.)
Note
At normal termination
At abnormal termination
Note
Note
Note
Note
Description
15
Advertisement
