Advertisement
10. Place the Work Panel (P-3) with the
Pre-drilled holes facing up(slot facing down)
and install Lock Plate (L1) using 2 Screws
(A4) as shown in illustration # 5.
Should you require assistance during assembly,
please call our Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
Toll-Free Customer Service
1-800-749-2258
11.
Place the Divider Panel (P-4) with the
Pre-drilled holes facing up and install
2 each Dowels (E) into the holes as
shown in illustration # 5.
12.
Slide Back Panel (P-5) over
the Wood Dowels (E) in the
Divider Panel (P-4)
13.
Secure Back Panel (P-5) to
Drawer Support (P-14)
using 1 Wood Screw (A) as
shown in illustration # 5.
14.
Tighten Screw using Allen
Wrench (S).
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
A4
L1
A
E
P-14
6
Illustration # 5
P-3
Illustration # 5
P-5
E
P-4
Advertisement
