Advertisement
P-16
P-18
Place 4 Metal Shelf Pins (J) in
47.
the two Side Panels (P-1 & P-2 )
at desired shelf height. Place
Removable Shelf (P-11) on Shelf
Support Pins (C)as shown in
illustration #16.
48.
Slide 2 assembled Drawers
onto Drawer Slides (P-22 &23).
Illustration # 17
R2
Illustration # 15
P-17
G2
P-16
R1
P-5
49.
50.
Align grooves on 2 Drawer Sides (P-16) with the
45.
groove on Drawer Back (P-17).Snap 4 Back
Drawer Connectors(G2) into the ends of Drawer
Sides (P-16) as shown in illustration #15.
46.
Repeat Steps 42-45 for the 2nd Drawer.
Drawer
Drawer
To install Grommets:
Insert Grommet Sleeve (R1) in Round opening in
Back (P-5) and as shown in illustration #17.
Snap Grommet Cap (R2) into Grommet Sleeve (R1)
as shown in illustration #17.
11
Illustration # 16
J
P-16
89832 - 04/05/06
Advertisement
