Advertisement
6.
Place the Drawer Support (P-14) with the
large Pre-drilled holes facing up and install 2
each Cam Locks (C) in the 2 large holes .
Attach 1 Left Drawer Slide (P-22) and 1
Right Drawer Slide (P-23) to the Drawer
7.
Support (P-14) using 8 each Screws (A3) as
shown in illustration #3.
A3
Illustration # 4
8.
Place the Divider Panel (P-4) with the
Predrilled holes facing up and install 2 each Cam
Posts (D) in the 2 holes as shown in illustration # 4.
Attach Drawer Support (P-14) to Divider Panel (P-4)
9.
as shown in illustration # 4. Secure by turning the
Cam Locks (C) 1/4 turn until they lock.
P-23
A3
P-14
D
P-14
A3
C
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
P-4
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
5
Illustration # 3
P-22
C
Phillips
Screwdriver
Arrow
P-1
Centerline of
Edge Drilled
hole.
17.
Advertisement
