Advertisement
Network
1. Press ▲/▼ bu�on to select what you want set.
2. Press OK bu�on to adjust.
3. A�er finishing your adjustment,Press OK bu�on to s
ave and return to the pervious menu.
Channel & Inputs
Press ▲/▼ bu�on to select "Channel & Inputs" set.
CHANNEL
In the HOME interface, select the "Se�ngs"icon,
press OK to open the input source list, select the
"Antenna".
Analon/Antenna/Cable/Satellite - Press ▲/▼ bu�on
to select the op�on then press OK bu�on to enter the
sub-menu.
Auto Channel Update - Press OK bu�on to choose ON/
OFF. When selec�ng ON,the system will automa�cally
scan and update channels a�er 5 minutes of standby.
Channel Update Message - Press OK bu�on to choose
ON/OFF. When selec�ng ON,the system will show you
the update message.
Antenna(Analog)
1. Menu->Se�ngs->Channel & Inputs->Antenna->
Channels.
2. Enter Menu->Se�ngs->Channel->Channels.
3. Channel Scan directly enters the automa�c search
pla�orm interface.
Update Scan: Re-automa�cally search for frequency
points outside the sta�on.
Analog Manual Scan: Manual ATV search sta�on. A�er
input the frequency point, you can select up or down
search sta�on.
Antenna(Antenna)
1. Menu->Se�ngs->Channel->Channels.
2. Enter Menu->Se�ngs->Channel->Channels.
3. Channel Scan directly enters the DTV automa�c search
pla�orm interface of Antenna.
Update Scan: Re-automa�cally search for frequency
points outside the sta�on.
Single RF Scan: DTV manual search,le� and right a�er
selec�ng RF Channel,directly OK search.
10
Advertisement
