Table of Contents
Advertisement
Help Guide
Mobile Motion Capture
QM-SS1
Performing calibration
Calibration is the detection of the orientation of the sensors on your body by the app for correct motion capture. The
position of a sensor changes even when the same user is reattaching the sensor. Perform calibration every time you put
on the sensors before starting motion capture.
On the [Calibration] screen, select the user's height and tap [NEXT].
1
Tap [START CALIBRATION] and stand up straight.
2
Hint
While standing up straight, keep your feet shoulder-width apart and your arms relaxed and down at your sides.
After the sound and vibration signals from your smartphone, take one step forward and then stand up
3
straight again.
[Successfully calibrated] appears on the screen and the motion capture screen appears.
Note
Do not hold your smartphone while you are standing up straight. Stand still without moving your body.
Do not look at your smartphone screen during calibration. Doing so shifts your head sensor and prevents the sensors from being
calibrated accurately. After you start the calibration, take one step forward with the sound and vibration and then stand up straight
again.
If the calibration fails, you may have incorrectly taken one step forward after you stood up straight the first time. Tap [WATCH
AGAIN] in the center of the [Calibration] screen to check the movement.
You can also watch a video of the calibration movements by accessing
If calibration fails even after you perform the steps correctly, reconnect the sensors. Take the sensors off your body, remove them
from their sockets, place them on a flat surface, and then reconnect them.
Tap
(menu icon) > [Return to start menu].
Related Topic
Overview of the motion capture screen
Resetting the pose
Recalibration
H-242-100-11(1) Copyright 2023 Sony Corporation
19
(menu icon) > [Tutorial video].
TP1001055226
Advertisement
Table of Contents
