Bang & Olufsen Beoplay M3 - Wireless Speaker System Manual

Bang & Olufsen Beoplay M3 - Wireless Speaker System Manual

Also See for Beoplay M3:

Advertisement

Bang & Olufsen Beoplay M3 - Wireless Speaker System Manual

Setting up and configuring your M3


Bang & Olufsen

Bang-Olufsen.com/APP:

www.apple.com

play.google.com

The box contains Beoplay M3 and up to three power cables. M3 can be set up as an individual speaker or in a speaker network. Use the Bang & Olufsen app to configure and connect your Beoplay M3.

Connecting your M3

Connecting your M3
Connect Beoplay M3 to the mains supply. Wait for 1 minute while both the connectivity indicator and the product indicator are flashing white. After the connectivity indicator flashes orange and a sound prompt is heard, the product is booted up and ready to be set up with the Bang & Olufsen app.

Streaming music

Streaming music
Beoplay M3 is a connected speaker, using Google Chromecast built-in Multi-room and Apple AirPlay. As a point-to-point source, Bluetooth is always open for pairing. Turn on Bluetooth on your device and select Beoplay M3.

Basic operation

Basic operation

  1. Volume switchPress +/- to increase/decrease volume.
  2. Press During standby, press the Connect/Join button to join existing multi-room groups. If no groups are available, the last connected source will initiate (Bluetooth). During audio playback, press to pause/play. Double press to switch source.

Buttons and connections

Buttons and connections

  1. Standby button Short press to put M3 in standby. Long press to turn M3 off.
  2. Reset button Short press both buttons C and D to enter setup mode. When in setup mode, short press both will cancel setup.
  3. Line in Mini-jack for connecting external audio sources.
  4. Power Connect M3 to mains supply using only the enclosed mains cable.

Indicators

Indicators

H Connectivity indicator

  • White (dim): Product is in standby mode.
  • White (flashing): Product is booting up.

Network mode

  • Orange (flashing): Ready to setup network connection/Reconnecting to network.
  • Orange (solid): Connected to the network. The wireless signal strength is medium to low.
  • White (solid): Connected to the network. The wireless signal strength is high.
  • Blue (solid): Not connected to network.

Bluetooth mode

  • Blue (solid): Indicator turns solid blue shortly after Bluetooth pairing is successful or during music playback through Bluetooth.
  • Red (solid, shortly): Indicator turns solid red shortly when Bluetooth pairing is unsuccessful.

I Product indicator

  • Off: Product is in standby mode or switched off.
  • White (flashing): Product is booting up.
  • Red (solid): Both Indicators turn solid red shortly before during factory reset.
  • Red (flashing): Both Indicators flash red at the same time to indicate that software update is in progress. Do not operate the product or switch it off.
  • Red (flashing): Firmware error. Disconnect the product from the mains supply and reconnect it.
  • Orange (flashing): Indicator is flashing orange when the product is overheating and needs time to cool down.


The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®.



AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air, iPad mini, and Lightning are trademarks of Apple Inc.


Google Chromecast and the Google Chromecast badge are trademarks of Google inc.


The Bluetooth® word mark and logos are registered trade-marks owned by Bluetooth SIG, Inc. and any use of such marks by Bang & Olufsen group is under license. Other trade-marks and trade names are those of their respective owners.


The Deezer name and logo are trademarks of Deezer. All other trademarks are the property of their respective owners.


Register online at www.bang-olufsen.com/register-product to receive important information about product and software updates – and to get exciting news and offers from the BANG & OLUFSEN Group. If you have purchased your product at a BANG & OLUFSEN store or at www. bang-olufsen.com, you have automatically been registered.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bang & Olufsen Beoplay M3 - Wireless Speaker System Manual

Advertisement

Need help?

Need help?

Do you have a question about the Beoplay M3 and is the answer not in the manual?

Questions and answers

Table of Contents