Table of Contents
Advertisement
Chapter 03
Connecting and Using a Source Device
Read below before installing the monitor.
1
Check the shapes of both ends of the cables that came with the monitor, and check the shapes and
positions of the matching ports on the monitor and external devices.
2
Before connecting signal cables, disconnect the power cables for the monitor and external devices
from the power outlet to prevent device damage from a short circuit or overcurrent.
3
After connecting all signal cables, connect the power cables for the monitor and external devices to
the power outlet.
4
Read the user manual to familiarize yourself with the monitor functions, precautions, and proper use,
before using the installed monitor.
Connecting and Using a PC
Select a connection method suitable for your PC.
― Connecting parts may differ in different products.
― Provided ports may vary depending on the product.
Connection Using the HDMI Cable
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
HDMI IN
― For optimum resolution, use a graphics card and an HDMI cable that support HDMI2.0 output. Ensure your
graphics card supports HDMI2.0 output using the graphics card manufacturer's website.
― Select an HDMI version. Version 2.0 supports a refresh rate of up to 100 Hz, and version 1.4 supports a refresh
rate of up to 50 Hz.
― When using dual monitor mode with HDMI2.0 input, disabling dual monitor mode after turning on the
monitor or entering power-saving mode may affect windows and other settings.
19
Advertisement
Table of Contents
