Attaching The Wall-Mount Bracket - Samsung C34J791WTR User Manual

Attaching the Wall-mount bracket

― Power the product off and remove the power cable from the power socket.
1
3
Attach the Wall-mount bracket here
A
B Wall-mount bracket
Align with A on the monitor, then tightly fasten with the screws removed from the stand (P.16).
B
2
4
• Notes
‒ Using a screw longer than the standard length can damage the internal components of the
product.
‒ The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-
mount kit other than the one specified or from an attempt to install the wall-mount kit on your
own.
‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm
or farther away from the wall.
‒ Be sure to use a wall-mount kit that complies with the standards.
‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.
Model name VESA screw hole specs in
millimeters
C34J791WT* 100.0 x 100.0 (3.9 x 3.9)
― Do not attach the Wall-mount bracket when the monitor is turned on. This may cause electric shock and
might result in injury.
Unit: mm (inches)
Standard Screw Quantity
M4 4 EA
17