Parkside 393729-2104 Operation And Safety Notes page 26

Electrical safety
m WARNING! Risk of electric
shock! Use the product only
with an RCD-protected socket-
outlet .
The product may not remain
unattended as long as it is
connected to the power supply .
Make sure that the nominal
voltage on the rating plate
complies with the supply
voltage .
The product has increased
energy consumption . Do not
connect any other devices (e .g .
heaters, air conditioners, etc .) to
the same circuit .
Shield the product, power
cord and plug from dust, direct
sunlight and dripping and
splashing water .
Protect the product from heat .
Do not place the product in
direct proximity to open flames
or heat sources such as heaters,
ovens or stoves .
Protect the power cord from
damage . Do not allow it to hang
over sharp corners; do not crush
or bend it . Keep the power cord
away from any hot surfaces and
open flames . Make sure that no
one may accidentally pull on it
or trip over it .
Regularly check power plug and
power cord for damages .
Do not operate the product if the
power cord or power plug are
damaged, if the product does
not work or is damaged in any
way .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
GB/IE 27