Advertisement
Assembly
5
Attach the front bracket to the
outer rail using two screws A
(4 × 10 mm), two plain
washers (φ4), two spring
washers (φ4), and two nuts.
6
Attach the rear bracket to the
outer rail using two screws A
(4 × 10 mm).
7
Attach the outer rails to the
rack using four screws C (4 ×
16 mm) for each rail.
4(E)
Stopper (If the rail
dose not move, lift
it up.)
Slide the retainer
until you can see the
screw holes.
Outer rail
3 Plate nut
2 Plain
washers
1 Screws C
Front
Retainer
2Front bracket
3Plain washers
4Spring washers
1Screws A
3Plain washers
4Spring washers
2 Spring washers
3 Plain washers
Rack
4 Plate nut
Outer rails
3 Plate nut
Rack
2 Plain
washers
1Screws A
Outer rail
5Nuts
2Rear bracket
5Nuts
1Screws C
2 Spring
washers
4 Plate nut
3 Plain
washers
Rear
Advertisement
