Advertisement
Assembly
1
Remove the left and right side
plates from the bottom part of
the monitor.
For a monitor joined to a
monitor control unit
Attach the short side covers
for rack mounting to the
monitor and the monitor
control unit.
See step 11 of "Assembly" in the
Installation Manual for the BKM-
32H Monitor Control Unit
Attachment Kit on how to attach
them.
2
Remove the four feet from the
bottom of the monitor (six feet
if the monitor is joined to a
monitor control unit).
3
Separate the inner rail of the
slide rail from the outer rail.
Note
Take care not to get your
fingers caugt in the sllide rail.
4
Attach the inner rail to the
monitor using four screws A (4
× 10 mm).
Side plate
Hold the plate spring
with your finger and
pull out.
Plate spring
Inner rail
Monitor
Monitor joined to a monitor
control unit
Feet
Monitor
Side plate
Foot
Feet
Foot
Outer rail
Inner rail
Screws A
(continued)
3(E)
Advertisement
