Insignia FLEX NS-P10A7100-C Quick Setup Manual

In the box
• 10.1" tablet
• Wall charger
• Micro USB cable
• Quick Setup Guide
• Important Information
Features
Front camera
microSD™ card slot
Micro USB port Earphone jack
Microphone
1 Charging the battery
Note: Charge your tablet fully (4.5 hours) before using it the first time.
1 Connect the micro USB cable to your tablet.
2 Connect the other end of the micro USB cable to the
wall charger, then plug the adapter into a power outlet.
Caution: Use only the included power adapter or a qualified 5V/2A
power adapter to charge your tablet's battery. An incompatible adapter
may damage your tablet.
Before using your new product, please read these instructions to prevent any damage.
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then
click Support & Service.
Enter NS-P10A7100 or NS-P10A7100-C
in the box under Manual, Firmware, Drivers
& Product Information, then click ►.
Volume
Power Rear camera
Speakers
Quick Setup Guide I
2 Turning on your tablet
• Press and hold the (power) button on the side of your tablet.
3 Setting up your tablet
When you turn on your tablet for the first time, you'll be prompted
to set up things like Wi-Fi and email. Follow the instructions
displayed on your tablet to complete setup.
Connecting to Wi-Fi
To use the Wi-Fi feature, you need access to a wireless
access point or hotspot. If you didn't do this during the
initial setup, follow these steps.
1 Tap Apps > Settings > Wi-Fi.
2 Tap the slider to turn Wi-Fi On, if needed. Your tablet
automatically scans for available networks.
3 Tap a Wi-Fi network.
• If the network is open, your tablet connects
automatically.
• If the Wi-Fi icon has a (lock), the network is
secured. Enter the password, then tap CONNECT.
When connected, "Connected" appears under the
network name.
NS-P10A7100 / NS-P10A7100-C
10.1" Flex™ Tablet
for Android™