Insignia FLEX NS?P10A6100 Quick Setup Manual

In the box
• 10.1" tablet
• Wall charger
• USB data transfer cable
• Quick Setup Guide
• Important Information
Features
Front camera
Micro HDMI port
Earphone jack Micro USB port
microSD™ card slot
Microphone

1 Charging the battery

Note: Charge your tablet fully (six hours) before using it the first time.
1 Connect the micro USB cable to your tablet.
2 Connect the other end of the micro USB cable to
the USB power adapter (wall charger), then plug
the adapter into a power outlet. It takes about
six hours to fully charge your tablet.
Caution: Use only the included power adapter or a qualified
5V/2A power adapter to charge your tablet's battery. An
incompatible adapter may damage your tablet.
Before using your new product, please read these instructions to prevent any damage.
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User Guide is not
provided in the box but is available online.
To find your manual, touch the ? icon on your tablet or
go to www.insigniaproducts.com on your computer,
then click Support & Service. Enter NS-P10A6100 in
the box under Manual, Firmware, Drivers & Product
Information, then click ►.
Reset hole Rear camera
Power on/off Volume up/down
button button

2 Turning on your tablet

• Press and hold the (power) button on the side of your tablet.

3 Setting up your tablet

When you turn on your tablet for the first time, you'll be prompted
to set up things like Wi-Fi and email. Follow the instructions
displayed on your tablet to complete setup.
Connecting to Wi-Fi
To use the Wi-Fi feature, you need access to a wireless
access point or hotspot.
1 Tap Apps > Settings >
2 Tap the slider to turn Wi-Fi On, if needed. Your tablet
automatically scans for available networks.
3 Tap a Wi-Fi network.
• If the network is open, your tablet connects
automatically.
• If the Wi-Fi icon has a
secured. Enter a password, then tap CONNECT.
Speakers
When connected, "Connected" appears under the
network name.
Quick Setup Guide I
10.1" Wi-Fi Android™ Tablet
Wi-Fi.
(lock), the network is
NS‐P10A6100