Volvo XC90 TWIN ENGINE 2018 Owner's Manual page 287

Related information
• Cruise control (p. 282)
• Reactivating Cruise Control from standby
mode (p. 285)
• Activating and starting Cruise Control
(p. 283)
• Switching off Cruise Control (p. 286)
Cruise Control
15
Reactivating Cruise Control from
standby mode
15
Cruise Control (CC ) can be temporarily put
into standby mode and then reactivated.
To start Cruise Control from standby mode:
– Press the button on the steering wheel
(1).
> The Cruise Control marking in the instru-
ment panel will change from GRAY to
WHITE and the vehicle will then return to
the most recently set speed.
or
DRIVER SUPPORT
To start Cruise Control from standby mode:
– Press the button on the steering wheel
(2).
> The Cruise Control markings and symbols
in the instrument panel will change from
GRAY to WHITE and the vehicle's current
speed will be set.
WARNING
A noticeable increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
• Cruise control (p. 282)
• Switching off Cruise Control (p. 286)
• Deactivating and putting Cruise Control in
standby mode (p. 284)
• Activating and starting Cruise Control
(p. 283)
285