Volvo XC90 TWIN ENGINE 2018 Owner's Manual page 181

Using the rain sensor's memory
function
The rain sensor monitors the amount of water on
the windshield and automatically starts the wind-
shield wipers.
Activating/deactivating memory
function
The rain sensor's memory function can be set to
activate so that the rain sensor button does not
need to be pressed each time the engine is
started:
Settings
1. Tap
in the Top view in the center
display.
My Car Wipers.
2. Tap
Rain Sensor Memory
3. Select
deactivate the memory function.
Related information
• Using the rain sensor (p. 178)
• Using the windshield and headlight washers
(p. 179)
• Using automatic rear window wiping when
backing up (p. 181)
• Wiper blades and washer fluid (p. 176)
• Using the rear window wiper/washer
(p. 180)
• Filling washer fluid (p. 638)
• Windshield wipers in the service position
(p. 637)
• Replacing windshield wiper blades (p. 636)
• Changing rear window wipers (p. 635)
• Using the windshield wipers (p. 177)
to activate/
WINDOWS, GLASS AND MIRRORS
Using the windshield and headlight
washers
The windshield and headlight washers clean the
windshield and headlights. Use the right-side
steering wheel lever to start the windshield and
headlight washers.
Starting the windshield and headlight
washers
Washing function, right-hand steering wheel lever.
Move the right-hand steering wheel lever
–
toward the steering wheel to start the wind-
shield and headlight washers.
> After the lever is released, the wipers
make several extra sweeps.
}}
179