Overview Of The Components - Clatronic FR 3769 H Instruction Manual

Unpacking the Appliance
1. Remove the appliance from the package.
2. Remove all packaging material such as films, filler, cable
holders and cardboard.
3. Check the delivery contents for completeness.
4. Should the package contents be incomplete or damages
be found, do not take the appliance into operation. Take
it immediately back to the dealer.

Overview of the Components /

Scope of Delivery
1 Temperature controller
2 On / off switch / timer
3 Heating indicator lamp
4 Air inlet openings
5 Air outlet openings
6 Frying basket
7 Handle of the frying basket
8 Strainer insert
Notes for Use
Location
• Set the appliance onto a non-slip, level, and heat-resist-
ant surface.
• Take care that the appliance and the mains cable never
are placed onto hot surfaces or near heat sources (e. g.
range, hob).
Electric Connection
Before inserting the power plug into the outlet, check that
the mains voltage to be used matches that of the appliance.
You can find the required information on the nameplate.
Connected Wattage
The total power consumption of this appliance can be up
to 1000 W.
CAUTION: Overload!
Do not use any multiple sockets, as this appliance is too
powerful.
Switching the Appliance On / Off
• The appliance is switched off if the timer is set to the 0
position.
• Operation is only possible if the frying basket is inserted
into the appliance.
• To use the appliance, set the desired time with the timer.
And set the desired temperature with the temperature
controller.
NOTE:
Once the time is up, a bell will sound. The appliance will
switch off automatically.
FR3769H_IM
Before Initial Use
• There is a protective layer on the heating element. To
remove this, operate the appliance for about 10 minutes
without any contents.
NOTE:
Any smoke or smells produced during this procedure
are normal. Please ensure sufficient ventilation.
•
WARNING:
Allow the appliance to cool down before you clean it!
- Disconnect the mains plug from the wall socket.
- Wipe the frying basket, the strainer insert, and the
inside of the appliance before using it.
Useful Hints for Use
• This appliance is used for the preparation of solid foods.
Do not prepare any soups or liquid foodstuffs in it.
• A safety switch prevents the use of the appliance without
the frying basket.
• To achieve an optimum result, fill the frying basket
maximal up to the MAX marking only. Never overfill the
frying basket, so that the food does not touch the heating
element.
• Never put oil or other liquids in the frying basket. In order
to achieve crispy results, you can brush the food with a
little bit of oil.
• Do not prepare the appliance for high-fat foods (e. g.
sausages).
• All foods can be prepared in the appliance, which are
also suitable for the oven.
• The strainer insert helps to let the accumulated fat settle
on the bottom of the frying basket. That makes the food
crispier.
• Note that the dough expands during baking of cakes,
bread or similar. Nothing must come into contact with the
heating element.
• Take out the strainer insert if you want to bake bread etc.
• Foods that are cooked over one another, must be
shaken after half way through the cooking time. Thus the
result is optimized and prevents uneven cooking.
• Pour water on homemade potato products after cutting
at least 30 minutes to reduce the potato starch. Then dry
the potato pieces with paper.
• The cooking time depends on several factors: Size, con-
dition, quantity of food and set temperature. For standard
values, see "Table of Cooking Times".
• If you do not preheat the hot air fryer, add 4 minutes to
the cooking time.
• Fry steaks / larger quantities of meat in a pan previously
before leaving to cook in the hot air fryer. Time and
temperature are dependent on the desired degree of
doneness.
• With the appliance, you can also reheat food. Set the
timer to 10 minutes and the temperature control to
150 °C.
37
27.01.21