Remove The Fans - Lenovo 14IAP7 Hardware Maintenance Manual

Figure 10. Remove antenna conductive fabric and shield conductive fabric
Step 2. Loosen six screws and remove two screws then remove the heat sink.
Figure 11. Remove the heat sink
Screw specifications
Go to
https://support.lenovo.com/partslookup
part:
Antenna conductive fabric
Shield conductive fabric
Heat sink

Remove the fans

Make sure the following FRUs (or CRUs) have been removed.
"Remove the rubber foot" on page 28
"Remove the lower case" on page 29
"Remove the heat sink" on page 32
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
33