Charging Cable - Volvo V90 TWIN ENGINE 2017 Owner's Manual

HYBRID INFORMATION

Charging cable

The charging cable with its control unit is used
to charge the car's hybrid battery.
The charging cable is located in the storage compart-
ment under the cargo area's floor hatch.
WARNING
Only use the charging cable provided with
your car or a replacement cable recom-
mended by Volvo.
Specifications, charging cable
Enclosure class
Ambient tempera-
(-25 ºF to 122 ºF)
ture
414
WARNING
•
The charging cable has a built-in circuit
breaker. Charging must only take place
with grounded and approved sockets.
•
Children should be supervised when in
the vicinity of the charging cable when it
is plugged in.
•
High voltage in the charging cable. Con-
tact with high voltage can cause death or
serious personal injury.
•
Do not use the charging cable if it is
damaged in any way. A damaged or inop-
erative charging cable must only be
repaired by a workshop - an authorised
Volvo workshop is recommended.
•
Always position the charging cable so
that it will not be driven over, stepped on,
tripped over or damaged in some other
way, or cause personal injury.
•
Disconnect the charger from the wall out-
let before cleaning it.
•
Never connect the charging cable to an
extension cord or a multiple plug socket.
IP67
Also, refer to the manufacturer's instructions
for using the charging cable and its compo-
-32 ºC to 50 ºC
nents.
IMPORTANT
Multiple plugs, extension cables, overvoltage
protection or similar devices must not be
used together with the charging cable since
this may involve a risk of fire, electric shocks,
etc.
An adapter between the 230 V socket (alter-
nating current) and the charging cable may
only be used if the adapter is approved in
accordance with IEC 61851 and IEC 62196.
IMPORTANT
Never unplug the charging cable from the
230 V socket (alternating current) while
charging is in progress - there is then a risk
of damaging the 230 V socket. Always stop
charging first before unplugging the charging
cable from the car's charging input socket
and then from the 230 V socket.
IMPORTANT
Clean the charging cable with a clean cloth,
moistened with water or a mild detergent. Do
not use chemicals or solvents. Do not
immerse the charging cable in water.
The charging cable and its associated parts
should not be swamped or immersed in water.