Table of Contents
Advertisement
Redialing a Ready Link Call
You can redial to the last Ready Link call that you dialed or received
(whichever was more recent).
To redial a Ready Link call:
1.
From the Ready Link List, highlight Redial, and press and hold
2.
Speak after the beep (keep pressing down
speaking). After speaking, release the button to allow others to
reply.
3.
When you are finished, press
Note:
You can change the volume and the speaker setting while a Ready Link call
is activated.
Volume:
pressing the navigation key up or down except when you are pressing and
holding
Ready Link Options
When you use Ready Link, several user options are available by
pressing Options (right softkey). To select an option, highlight it and
press
.
Copy to copy a contact to the Personal List. Copy Group appears
when you highlight a group. (This option doesn't appear if the
entry is already in the Personal List or when you select Personal
List/Personal Groups.)
Edit to edit a Ready Link number and/or name. See page 142.
Erase to erase a contact. Erase Group appears when you highlight a
group.
Add Contact to add a new contact. Add Group appears when you
highlight a group list. See page 140 for details.
Erase R-Link List to erase entries saved in the Ready Link List .
Help to see the Ready Link instruction page.
Note:
When you use additional accessories, the volume of Ready Link floor tones
is fixed as follows.
Section 2J: Using Ready Link
.
You will see R-Link redialing... and Connecting... followed by
the text "You have floor."
Adjust the voice volume by using the Side Volume key or by
.
Switch the speaker on or off by pressing
Speaker:
Speaker/Car Kit:
.
Level 3.
Earpiece/Headset:
while you are
.
Level 2.
137
Advertisement
Table of Contents
