Ready Link Call Alerts - Sanyo MM-8300 User Manual

Preparing Your Phone for Sprint PCS
Ready Link Service
Every time you turn on your phone, your phone will identify
itself and make itself available to the Ready Link network.
When you turn on your phone in an area where
Sprint PCS Ready Link service is available, your phone will
display "Preparing Ready Link service... Please wait."(When
the Ready Link icon appears on the display, your phone is
ready to make and receive Sprint PCS Ready Link calls.)

Ready Link Call Alerts

There are several ways your phone alerts you during
Sprint PCS Ready Link calls.
When you make or receive a Sprint PCS Ready Link call:
The phone sounds (depending on the Ringer Type and
Ringer Volume setting).
The backlight illuminates.
The screen displays a Sprint PCS Ready Link call message.
The other party's Sprint PCS Ready Link number and name
(if available) are displayed.
The screen displays who has the floor.
The status of a Sprint PCS Ready Link call is displayed as follows:
The Green LED On indicates you have the floor and may
speak.
The Red LED On indicates another contact has the floor.
The LED Off indicates the floor is open. (You can take the
floor and speak by pressing and holding
Section 2K: Using Sprint PCS Ready Link
.)
205