Plus Code Dialing - Sanyo SCP-7000 User Manual

To dial or save phone numbers with pauses:
1.
Enter the phone number.
2.
Select Options (right softkey) and select either
Hard Pause or 2-Sec. Pause. (Hard pauses are displayed as
an "H"and two-second pauses as a "T.")
3.
Enter additional numbers.
4.
Press
– or –
To save the number in your Contacts, select Options
(right softkey) > Save Phone#.
Note:
When dialing a number with a hard pause, press
send the next set of numbers.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code
Dialing to automatically enter the international access code
for your location (for example, 011 for international calls
made from the United States). This feature is subject to
network availability.
To make a call using Plus Code Dialing:
1.
Press and hold
phone display.
2.
Dial the country code and phone number you're calling,
and press
dialing will automatically be dialed, followed by the
country code and phone number.)
Note: Plus Code Dialing cannot be used when entering an address
or a number for SMS Text Messaging or SMS Voice Messaging.
(See "Using SMS Text Messaging"on page 171 or "Using SMS
Voice Messaging"on page 180.)
to dial the number.
until a "+"is displayed on your
. (The access code for international
Section 2A: Phone Basics
to
39