Saving A Phone Number - Sanyo SCP-7000 User Manual

End-of-Call Options
To display the following options, press Options(right softkey)
within 10 seconds after disconnecting a call. To select an option,
highlight it and press
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Save Phone# to save the phone number in your Contacts list.
Go to Phone Book is displayed when the number is
already in your Contacts list. (See "Saving a Phone
Number" below.)
Note: The End-of-Call options are not displayed for calls identified as
No ID or Private.

Saving a Phone Number

Your phone can store up to 500 phone numbers in up to 300
Contacts entries. (An entry may contain up to seven numbers.)
Each entry's name can contain 16 characters. Your phone
automatically sorts the Contacts entries alphabetically. (For
more information, see Section 2F: Using Contacts on page 105.)
To save a number from standby mode:
1.
Enter a phone number.
2.
Press Options (right softkey) > Save Phone#.
3.
Select a label and press
4.
Select from the following entry modes:
New Name to enter a new name.
From Ph. Book to select a name from the Contacts
entry list.
5.
Press Save (left softkey).
6.
Press Done (left softkey) to return to standby mode.
.
.
Section 2A: Phone Basics 37