Related information
Fitting and removing the towing eye (p. 483)
•
Hazard warning flashers (p. 153)
•
Recovery (p. 484)
•
Using jump starting with another battery
•
(p. 472)
Selecting ignition mode (p. 435)
•
Fitting and removing the towing eye
Use the towing eye if the car shall tow another
vehicle. The towing eye is screwed into a threa-
ded socket behind a cover on the right-hand
side of the rear bumper.
NOTE
If the car is equipped with a towbar, there is
no rear mounting for a towing eye.
Fitting the towing eye
Take out the towing eye from the foam block
under the floor in the cargo area.
STARTING AND DRIVING
Remove the cover – press on the marking
with a finger while you fold out the opposite
side/corner.
> The cover pivots around its centre line and
can then be removed.
}}
483