Volvo V60 TWIN ENGINE 2018 Owner's Manual page 153

Active bending lights*
Active bending lights are designed to provide
maximum illumination in bends and junctions.
5
Cars with LED headlamps* can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
Active bending lights follow steering wheel move-
ments to provide maximum illumination in bends
and junctions and can thereby provide the driver
with improved visibility.
The function is activated automatically when the
car is started. In the event of a fault in the func-
tion, the symbol illuminates in the driver
display at the same time as the driver display
shows an explanatory text.
LED (Light Emitting Diode)
5
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is activated when the car is supplied
from the factory and can be deactivated/acti-
vated via the centre display's function view.
Press the Active Bending
Lights
button.
Related information
Adjusting light functions via the centre dis-
•
play (p. 145)
Front fog lamps/cornering lights* (p. 151)
•
Front fog lamps/cornering lights*
The front fog lamps emit a stronger beam than
dipped beam and are therefore additionally
effective in fog.
Button for front fog lamps.
The rear fog lamps can only be switched on when
the car's electrical system is in ignition position II
and the rotating ring on the stalk switch is in
position , or .
Press the button to activate and deactivate. The
symbol illuminates in the driver display
when the front fog lamps are switched on.
The front fog lamps switch off automatically when
the car is switched off or when the rotating ring
on the stalk switch is set to the
LIGHTING
position.
}}
151
* Option/accessory.