Volvo V60 TWIN ENGINE 2018 Owner's Manual page 417

that the car must be switched off prior to charg-
ing.
Connect the charging cable to a 230 V
socket. Never use an extension cable.
For charging cables with controls on the con-
trol unit: Set the correct charging current (for
existing 230 V socket) on the control unit.
Open the charging hatch. Remove the charg-
ing handle's protective cover and then press
the handle the whole way into the socket for
the car.
Clamp the charging handle's cover in place
as illustrated.
IMPORTANT
To avoid damage to the paint, e.g. in the event
of high winds, position the charging handle's
protective cover so that it does not touch the
car.
HYBRID INFORMATION
3. The charging cable's charging handle is fas-
tened/locked in, and charging starts within
5 seconds. When charging has started, the
LED lamp in the charging input socket
flashes with a green glow. The driver display
shows the remaining estimated charging
time or whether charging is not working as
intended.
Battery charging can be interrupted for a
while if the car is unlocked:
and the door is opened - charging restarts
•
within a few minutes.
without the door being opened - the car is
•
relocked automatically. Charging restarts
after 1 minute.
IMPORTANT
Never unplug the charging cable from the
230 V socket (alternating current) while
charging is in progress - there is then a risk
of damaging the 230 V socket. Always stop
charging first before unplugging the charging
cable from the car's charging input socket
and then from the 230 V socket.
Condensation from the air conditioning may drip
under the car during charging. This is normal and
takes place due to cooling of the hybrid battery.
}}
415