Using The Battery - Sprint SCP-5000 User Manual

SCP-5000(E)/001_102 01.1.18 11:58
Tip:
Be sure to charge your
phone's battery and
watch your indicator
to ensure your levels
are OK.
26
Page 26

Using the Battery

Installing the Battery
Your Sprint PCS Phone comes with a Lithium
Ion battery. Follow these steps to install it:
Place the battery into the space beneath
1.
the antenna with the metal contacts at the
bottom, facing downward.
Gently press down until it's in place and
2.
the battery release latch snaps.
Removing the Battery
To remove your battery for charging or for
another reason, follow these easy steps:
Make sure the power is off so that you don't
1.
lose any stored numbers or messages.
Press up on the battery release latch and
2.
hold the battery, then pull it up and out at
a 45-degree angle.
Charging the Battery
Your Sprint PCS Phone comes with a
rechargeable battery. You should charge the
battery as soon as possible so you can begin
using your phone.
Keeping track of your battery's charge is
important. If your battery level becomes too
low, your phone automatically turns off and
you'll lose everything you were just working
on. (A series of alert tones will sound just
before the phone turns itself off.)
For a quick check of your phone's battery
level, glance at the battery charge indicator
located on your phone's (Main or Sub)
display screen.
Getting to Know your Sprint PCS Phone