Table of Contents
Advertisement
Basic setting
EmotionLight
Gap illumination
Start programme
Tone volume
1
Factory setting (may vary according to model)
Display text
Selection
1
EL:01
EL:00 - EL:02
1
I:01
I:00 - I:01
1
SP:01
SP:00 - SP:01
1
SL:02
SL:00 -SL:03
Basic settings en
Description
Interior light.
¡ With the setting "EL:00"m the in-
terior light is switched off.
¡ With the setting "EL:01", the in-
terior light can be activated via
the ON/OFF
button.
¡ With the setting "EL:02", the in-
terior light goes on when you
open the appliance door.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
With the "EL:02" setting, the power
consumption of standby mode in-
creases above the specified value.
→ "Technical specifications",
Page 62
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch Gap illumination on "I:01" or
off "I:00".
Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected is set by de-
fault when the appliance is
switched on.
¡ With the setting "SP:01", the Eco
50° programme is set by default
when the appliance is switched
on.
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
If the Eco drying function is activ-
ated, the end of the programme is
not indicated by an audible signal
tone.
37
Advertisement
Table of Contents
