Advertisement
The options have been made as user-friendly as possible, however sometimes
reference to the datasheet will be required to understand some of the options.
Once selections have been made, clicking on the Generate button will generate
customized C source code based on your selections.
In some situations, notes may be displayed along with the generated code. Notes
are shown immediately before the generated code. Typical reasons for notes
appearing include:
Attempting to use a baud rate that is not possible. In this case the actual
•
baud rate that will be generated will be given along with the error.
Flash locations in the device must also be configured along with using the
•
generated code. In this case the relevant settings for the Flash locations will
be given.
Resource conflicts may also be shown along with the generated code. Resource
conflicts occur when more than one peripheral that has been configured uses the
same device pin or other resource such as a timer. When a resource conflict
occurs, the resource in question along with which peripherals use it are shown.
PAB90x-1 Getting Started V1.0
Page 24
Advertisement
