Table of Contents
Advertisement
Problem
An image is not
captured when
the still image
shooting button
or video clip
recording
button is
pressed.
An image is not
captured when
the still image
shooting button
or video clip
recording
button is
Shoot-
pressed.
ing
The flash does
not operate.
The flash does
not operate.
A warning tone
(beep-beep-
beep) sounds,
and it is not
possible to take
a picture using
the self-timer.
Cause
The power is not
turned on.
The maximum
number of images
that can be captured
or the maximum
video clip recording
time has been
reached.
The flash off mode
is selected.
The battery pack is
dead.
The lamp mode Q
is active.
The battery pack is
consumed.
Action
When the power
save function is
active, after pressing
one of the buttons to
turn on the camera, if
the shooting power is
off, press the ON/
OFF button to turn it
on.
Install a new card.
Erase the images
that are not
necessary.
Save the images to
separate media, then
erase all the images
from the card.
Set the flash to
automatic flash mode
or forced flash mode.
Recharge the battery
pack, or replace with
a new battery pack.
Set to a different
mode.
Install a sufficiently
recharged battery
pack.
English
Refer-
ence
page
38
36
75,
129
60
34,
35
58
34,
35
158
Advertisement
Table of Contents
