Cable Adapter - Fisher FVD-C1 Instruction Manual

CABLE ADAPTER

When not using the docking station, you can connect the camera to a
computer, printer, TV or AC adapter/charger, etc, using the supplied adapter.
1
Attach the adapter to the docking station terminals on the bottom of
the camera.
2
Various devices can be connected to the adapter terminals
DC IN terminal:
Connect the supplied AC adapter/charger.
DIGITAL/AV terminal:
Connect to a computer, printer or TV.
Note
The remote control unit cannot be used.
e Unlike when using the camera in the docking station, when the adapter is
connected, the remote control unit cannot be used to operate the camera. To
play back data from the camera, use the operation buttons on the camera.
The battery cannot be recharged.
e When recharging the battery pack that is installed in the camera, set the
camera in the docking station. To recharge the battery pack without using
the docking station, remove the battery pack from the camera and set it in
the AC adapter/charger to recharge it.
To docking station terminal on the camera
Supplied USB interface cable
or AV cable
Supplied AC adapter/charger
138
English