Fisher FVD-C1 Instruction Manual page 140

DOCKING STATION
<Resetting the remote control code to "RC CODE 1">
1
Aim the infrared emitter at the remote control sensor on the docking
station.
2
Hold down the CH button and press the [J] button for about 3
seconds.
Select the image to play back.
1
Connect the docking station to a TV, and set the camera in the
docking station.
2
Press the CAMERA/CHARGE button to turn on the camera lamp.
3
Set the TV input switch to VIDEO input.
e If the camera is set to the playback mode, the Playback Screen
appears on the TV monitor. The playback method is the same as when
viewing images on the LCD monitor.
137
English
CAMERA/CHARGE button
Camera indicator