Advertisement
14
www.raider.bg
2.3.3. Setting
The joint must be allowed to set (i.e. held) in
accordance with the data given
in Fig. 5, column 4.
2.3.4. Cooling
The joint must not be subjected to the
stresses imposed by further pipe-laying
operations until the cooling-off period has
expired.
3. Maintenance
WARNING
Before any repair work, pull the mains plug!
This work may only be performed
by qualified personnel.
3.1. Maintenance
RAIDER units are entirely maintenance-free.
3.2. lnspection/repairs
The anti-adhesive coating on the heating
element must be cleaned with nonadherent
paper or a non-fraying cloth and spirit or
industrial alcohol before each
welding process. Any remnants of plastic
adhering to the heating element must
be cleaned off in the same way. In this
process, take care to ensure that the
anti-adhesive coating on the heating
element is not damaged by tools.
4. Action in Case of Trouble
4.1. Trouble: Sleeve welding unit does not
heat.
Cause: ● Sleeve welding unit is not plugged
in.
● Mains lead is defective.
● Mains socket is defective.
● Unit is defective.
4.2. Trouble: Plastic remnants stick onto the
heating tools.
Cause: ● Heating tools are dirty (see 4.2.).
● Anti-adhesive coating is damaged.
5. Disposal
The heating element muff welding
equipment may not be thrown into the
domestic waste after use. It must be
disposed of according to the legal ulations.
6. Manufacturer's Warranty
For improper used and subsequently
damaged PTFE-coatings of the heated
tool no guarantee will be granted.
The warranty period shall be 12 months
from delivery of the new product to the
first user. The date of delivery shall be
documented by the submission of the
original purchase documents, which must
include the date of purchase and the
designation of the product. All functional
defects occurring within the warranty
period, which are clearly the consequence
of defects in production or materials,
will be remedied free of charge. The remedy
of defects shall not extend or
renew the warranty period for the product.
Damage attributable to natural wear
and tear, incorrect treatment or misuse,
failure to observe the operational
instructions, unsuitable operating materials,
excessive demand, use for unauthorized
purposes, interventions by the customer or
a third party or other
reasons, for which RAIDER is not
responsible, shall be excluded from the
warranty
Services under the warranty may only be
provided by customer service stations
authorized for this purpose by RAIDER.
Complaints will only be accepted if the
product is returned to a customer service
station authorized by RAIDER without
prior interference in an unassembled
condition. Replaced products and parts
shall become the property of RAIDER.
The user shall be responsible for the cost of
shipping and returning the product.
The legal rights of the user, in particular the
right to make claims against the
seller under the warranty terms, shall not be
affected. This manufacturer's
warranty only applies for new products
which are purchased in the European
Union.
Advertisement
