Safety information 1. Safety information IMPORTANT SAFET Y INSTRUCTIONS The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Page 4
Safety information 10. NON-USE PERIODS – The power cord of the product should be unplugged from the outlet and slide the power switch to OFF position when left unused for long periods of time. 11. OBJECT AND LIQUID ENTRY – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Getting Started 3. Getting Started 3.1. DAB/FM antenna Before using your radio for DAB or FM reception, full extend the telescopic antenna which located at the back of unit. You may need to adjust the position of the telescopic antenna for maxing signal strength.
Getting Started To turn the unit in STANDBY mode: • Press the STANDBY button. The clock will continue to run whilst mains power is connected. 3.5.2. Using battery power Charging the battery • Slide the power switch to “OFF” position. •...
Getting Started Press TUNE +/- to scroll the menu options. To select an option, press SELECT [Main menu] button -> SYSTEM [Clock Setup] Set the Clock setup to Manual (Defaulted at Radio). To select an option, press SELECT button. 6. Repeat steps 2-5 if any sub-option is available under an option. 3.8.
Getting Started 3.8.4. Show DAB information During DAB radio broadcast, press INFO button repeatedly to scroll through the following information (if available): • Station name • Channel and frequency • Audio bit rate • Signal strength • Time/ Date • Dynamic label segment (DLS) •...
Getting Started 3.10.2. Store FM Radio stations manually Tune to FM radio station. Press and hold PRESET button in 3 secs to activate programming mode. Display show P1 and briefly, press TUNE +/- repeatedly to select a preset number Press SELECT to confirm Repeat steps 1-4 to store more FM stations.
Getting Started 3.11. Factory Reset This option will restore all settings to ‚ factor y original’. All clock, station lists and stored preset stations will be cleared. After factor y reset the radio will automatically re-scan the DAB band. 3.12. Aux in Connect your auxiliary device to the 3.5mm AUX IN socket on the back of the unit.
Troubleshooting 4. Troubleshooting PROBLEM CAUSE / SOLUTION No power – Slide the power switch to ON position. – Ensure that the power plug is connected properly. – Ensure that there is power at the AC Mains. – Ensure that the batteries are fully charged. –...
Page 14
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical &...