Table of Contents
Advertisement
Installation Instructions
Step 3: Connect hose to dryer.
• Connect the water supply hoses to the
COLD water tap tightly by hand and then
tighten another 2/3 turn with pliers.
Make sure that there are no kinks in the
hose and that they are not crushed.
Step 4 : Turn on the cold water tap.
Check for leaks.
Check that the water taps are turned on.
Check for leaks around "Y" connector,
tap, and hoses.
NOTE
• After completing the connection, if
water leaks from the hose, repeat
the same steps.
11
Advertisement
Table of Contents
