Table of Contents
Advertisement
MAINTENANCE
Recommended Engine Oil
• Honda Genuine Motor Oil
• Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container
This seal indicates the oil is energy conserving and
that it meets the American Petroleum Institute's
latest requirements.
Use Honda Genuine Motor oil or another
commercial engine oil of suitable viscosity for the
ambient temperature as shown.
You may also use synthetic motor oil if it is labeled
with the API Certification Seal and is of the
specified viscosity grade.
Adding Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. reinstall the engine oil fill cap, and tighten it
securely.
4. Wait for three minutes and recheck the engine oil
dipstick.
NOTICE
Do not fill the engine oil above the upper mark. overfilling the engine oil can result
in leaks and engine damage.
136 |
Ambient temperature
4-cylinder models
Engine oil fill cap
6-cylinder models
Engine oil fill cap
Resetting the Engine Oil Life
If you change or replace the vehicle's engine oil yourself, you must reset the
engine oil life.
Models with information display
1. Press the select/reset knob until the engine oil
life appears in the display.
2. Press and hold the knob for 10 seconds or more,
until the display begins to blink.
3. Press and hold the knob for 5 seconds or more.
The engine oil life display returns to 100%.
Models with multi-information display
Use the Info (p/q) and SeL/reSeT buttons on the steering wheel buttons to
control the display.
1. Scroll to the vehicle Settings screen, and select
it.
2. Scroll to the Maintenance reset screen, and
select it.
3. Select reset. The maintenance codes disappear,
and the engine oil life display returns to 100%.
NOTICE
Failure to reset the Maintenance Minder display after a maintenance service
results in the system showing incorrect maintenance intervals, which can lead to
serious mechanical problems.
MAINTENANCE
| 137
Advertisement
Table of Contents
