Table of Contents
Advertisement
VEHICLE CONTROLS
Door Operation
Use several methods to lock or unlock the doors.
Using the Lock Tab
To unlock: Pull the lock tab rearward. When you
unlock the door using the lock tab on the driver's
door, only the driver's door unlocks.
To lock: Push the lock tab forward. When you lock
the door using the lock tab on the driver's door, the
passenger's door locks at the same time.
Using the Inner Handle
When you pull either door inner handle, the door
unlocks and opens. on vehicles with smart entry,
pulling the driver's door inner handle also unlocks
the passenger's door.
Using the Master Door Lock Switch
To unlock: Press the unlock side of the switch to
unlock both doors.
To lock: Press the lock side of the switch to lock
both doors.
Using the Trunk Opener
Pull the trunk release near the bottom of the driver's
seat to unlock and open the trunk.
32 |
To lock
Lock tab
To unlock
Inner handle
To lock
To unlock
Master door
lock switch
Trunk
release
Power Window Operation
The power windows can be opened and closed when the vehicle is on by using the
switches on the doors. The switches on the driver's side can be used to open and
close all the windows.
Automatic Operation
To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To stop the
window at any time, push or pull the switch again
briefly.
Manual Operation
To open: Push the switch down lightly.
To close: Pull the switch up lightly.
release the switch when the window reaches the desired position.
Power Window Lock
Push in the power window lock button so only the driver's window can be
operated.
WARNING
Closing a power window on someone's hands or fingers can cause serious
injury.
Make sure your passengers are away from the windows before closing them.
VEHICLE CONTROLS
On
Off
Power window
lock button
Driver's
window
switch
Passenger's
window switch
| 33
Advertisement
Table of Contents
