Table of Contents
Advertisement
VEHICLE CONTROLS
Adjusting the Mirrors
Adjust the angle of the mirrors for the best visibility when you are sitting in the
correct driving position.
Rearview Mirror with Day/Night Positions*
Manually adjust the position to reduce headlight
glare from vehicles behind you. Flip the tab to
switch between day and night positions.
Automatic Dimming Rearview Mirror*
When driving after dark, the automatic dimming
function reduces the glare from headlights behind
you.
The function cancels when the shift lever is in
reverse (r).
Power Door Mirrors
Adjust the power door mirrors when the vehicle is on.
L/R selector switch: Select the left or right mirror.
After adjusting the mirror, return the switch to the
center position.
Mirror position adjustment switch: Press the switch
left, right, up, or down to move the mirror.
44 |
Tab
Daytime
position
Night position
Sensor
Selector switch
Adjustment switch
*if equipped
HomeLink
Universal Transceiver*
®
Program your vehicle to operate up to three remote-controlled devices around
your home—such as garage doors, lighting, or home security systems—using the
buttons on the ceiling.
Training a Button
Park near the system you want to program, and follow the instructions in the
flowchart below.
1
Position the remote transmitter you wish
to link 1–3 inches (3–8 cm) from the
HomeLink button you want to program.
2
Press and release the desired HomeLink
button. Hold the button on the remote
transmitter.
Does the HomeLink indicator (LED) change
from slowly blinking to constantly on or
rapidly blinking? This should take less than
one minute.
NO
YES
a
Press and release the HomeLink
button. Press and release the button on
the remote every 2 seconds.
Does the LED change from slowly blinking
to constantly on or rapidly blinking? This
should take less than one minute.
NO
YES
To retrain a button or erase codes, see the owner's Manual on the owner
Information CD or at owners.honda.com (U.S.) or www.myhonda.ca (Canada).
If you need help, visit www.homelink.com or call (800) 355-3515.
VEHICLE CONTROLS
Buttons
Indicator
3
Press and hold the programmed
HomeLink button for about a second.
Does the device (garage door opener) work?
NO
YES
4
Training
Press and hold the
complete
HomeLink button
again.
HomeLink indicator
HomeLink LED
rapidly blinks.
remains on.
a
The remote has a rolling code. Press the
"learn" button on the remote-controlled
device (e.g., garage door opener).
Within 30 seconds, press and hold the
b
programmed HomeLink button for
2 seconds.
Press and hold the HomeLink button
5
again; the remote-controlled device
should operate.
*if equipped
| 45
Advertisement
Table of Contents
