Download Print this page
Belimo EXT-KA-SE100 User Manual

Belimo EXT-KA-SE100 User Manual

Smart air quality monitor

Advertisement

Quick Links

EXT-KA-SE100
Smart Air Quality Monitor
www.belimo.com
info.asiapacific@belimo.ch

Advertisement

loading
Need help?

Need help?

Do you have a question about the EXT-KA-SE100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Belimo EXT-KA-SE100

  • Page 1 EXT-KA-SE100 Smart Air Quality Monitor www.belimo.com info.asiapacific@belimo.ch...
  • Page 2 Contents English 中文...
  • Page 3 *32GB maximum Externals and Air Flow Air is drawn into the EXT-KA-SE100 from both the modules on the lower side, as well as the air intake on Important Safeguards the upper side. It is vital that neither side of the device is covered. Any changes in airflow may affect the Please read the safety warnings before use and take the necessary precautions to reduce the risk of fire, readings and accuracy.
  • Page 4: Installation

    To insert a sensor module, simply slide it into the bay, ensuring the Belimo logo on the aluminium casing is facing the front of the EXT-KA-SE100. When inserted correctly, the module will click into place, and an LED light on the module’s front will briefly flash.
  • Page 5 校准和测试证书 以太网口 USB-A端口 传感器进气口 触摸屏 MicroSD卡插槽* 传感器模块 传感器进气口 USB-C端口 传感器模块指示灯 开关键 *最大 32GB 防静电袋 外观和空气流动 重要预防措施 EXT-KA-SE100 的进气口位于设备的上方和下方,使用时请确保设备的任何一侧都不能被覆盖。气流的变 请在使用前阅读安全须知,并采取必要预防措施来降低火灾、电击或受伤的风险。 化可能影响 EXT-KA-SE100 的读数及准确性。 安全须知 供电和联网方式 为了避免危险,必须始终由制造商、服务代理商或有资质的人员进行安装、维护等操作。 · 安装与维护前,请确保电源已断开。 · EXT-KA-SE100 提供多种供电和联网选择: 请勿以任何方式改造或使用非官方配件维修维护设备。 · 请勿将设备置于高湿度环境或可能直接接触水的位置。 · 供电: 请勿将设备置于室外。 USB-C:仅可使用设备随附的数据线及充电器或适配器 · · 请勿将设备放在散热器、壁炉、烤箱、炉灶等热源附近。...
  • Page 6 传感器模块 安装 EXT-KA-SE100 EXT-KA-SE100 采用模块化设计,便于控制及更换传感器。其中,二氧化碳传感器内置于设备,设备下方 重要: 关于产品安装说明、供电以及联网设置等更多信息。 的两个传感器凹槽可用于装载各种其他的传感器模块。 安装传感器模块时,只需将传感器轻轻压入凹槽内,确保铝制外壳上的 Belimo 标志朝外。当正确安装后 ,模块将被锁定于凹槽内,如设备已经接入电源,模块凹糟上方的模块状态指示灯会短暂亮起且呈红色。 如需拆卸模块,轻轻按压传感器模块左侧指示灯位置,传感器会自动弹出,即可从槽内移出模块。请不要 按压右侧风扇位置。 传感器模块可以安装到任何一个传感器凹槽中,并且任意顺序安装均可。传感器模块在 EXT-KA-SE100 开 机运行时以及关闭时均可进行更换。 默认情况下,EXT-KA-SE100 随机附带 EXT-KA-KM100 和 EXT-KA-KM103 传感器模块, EXT-KA-KM100 模块检测PM ,EXT-KA-KM103 传感器模块检测TVOC和温湿度。 传感器模块状态指示灯含义: 传感器模块工作正常 指示灯灭 传感器模块成功安装 指示灯闪一次 传感器模块需要更换 指示灯亮 设备控制 首次打开 EXT-KA-SE100 之前,请使用随附的 USB Type-C 电缆和电源适配器将其连接到电源。接通电源...